10 Reasons Your Garage Door Won’t Open

garage door issues

Why Your Garage Door Won't Open?

Are you wondering why your garage door will not open all of a sudden? You are trying to get to your office early, but the garage door will not work. And no matter how hard you try, there seems to be no solution to your problem. What you probably did not know is that its garage door opener is broken, which is why you are going to need the professional help of a garage door repair company.

Of course, there are many reasons why your garage door will not open. For instance, you might need a brand new set of garage door springs or torsion spring apart from the aforementioned garage opener. Or maybe your garage door cables just need total replacement. Whatever it is, checking the top reasons will help you understand the situation better. Here they are:

1. Your Photo Eye is Completely Blocked

Most garage doors, especially those that are very old, tend to have a photo eye. It is responsible for detecting whether an object or person is blocking the garage door; hence, it will not lower down. Your goal is to determine if the cord is attached to the eye and make sure it is neither cut nor damaged. If so, then you need a professional garage repair technician.

2. Power Source is Broken

It is funny because many people often forget that their Craftsman garage door opener or LiftMaster garage door opener is not working simply because the power source is unplugged. While it can sound really ridiculous, this actually happens from time to time. But if you are sure that the power source is plugged, then it could be that it is broken.

3. Broken Torsion Springs

Problems with your garage door are not just all about the garage door keypad or garage remote. It could also involve parts like the torsion springs. When it is broken, you will likely to hear a very loud noise. It is like someone just fired a gun. When this happens, make sure to contact a professional right away and have your door fixed.

4. Cables Have Snapped

Same with a bike sprocket, the cables can always become disengaged. In most cases, when a torsion spring breaks, the cable will snap immediately. Unfortunately, this is a serious threat to your vehicle or wall, let alone become a serious harm. If your garage door cables have snapped, do not hesitate to contact a professional to help you.

5. Sensitivity Completely Out of Adjustment

This can always happen actually, especially when a newer garage door is installed. If the sensitivity of the door is set too low or high, it will have a hard time opening. Your best course of action is to check the manufacturer's directions and find out how the sensitive can be reset. From there, all you have to do is bring them to the correct levels.

6. Remote Control Needs Repair

Another reason why your garage door is not working is due to a broken garage remote. For starters, the remote might just be out of a range. If not, the antenna on the motor is having issues. Regardless, have it checked to find out.

7. Limit Setting Requires Adjustment

If your garage door is able to close but then immediately pops open again, then you certainly have a problem. What you will need to do is check the limit settings. It is basically responsible for determining just how far to move the door so you can close it properly. If the settings are off, the door will hit the ground before the opener believes it should.

8. The Door Is Off Its Track

If your garage door off track, then expect for it not to slide properly. The very first thing you need to do is ensure that the door is rolling smoothly along its metal track. From there, you might want to check the track for gas, bumps, or obstacles. Lastly, observe the garage door’s progress.

9. There’s an Obstacle

In order to steer clear from injury, garage doors are designed to reverse if they come into contact with an obstacle. When it starts to close halfway and then reverses for no obvious reason, then this could be a sign that an object is preventing it from closing. Perhaps this is something that you are just unable to see right away. So, as always, start by checking the tracks for stuff like rocks, dirt, and other debris. Take some time to give your garage door’s tracks a wipe-down in an attempt to remove anything that might be getting in the way.

10. "Disconnect" Has Been Switched

In case you did not know, your garage door opener comes with a disconnect switch. It can also be a knob or cord. Regardless, its goal is to give you the ability to operate the door manually in case of a power outage. What you want to do is ensure that the motor is not disconnected.